LCD module, 20x4, with IIC/I2C driver

650.00 Php 650.00 Php 650.0 PHP

Add to Cart


High quality guaranteed!


How to Test LCD



Odoo image and text block

2. Connect the dupont wires from Arduino board to LCD driver

LCD module (4 pin) -> Arduino Uno (4 pin)

LCD module​ ​Dupont Wire ​Arduino Uno
​GND Black​ ​GND
​VCC White​ ​+5V
​SDA ​Violet ​A4
​SCL ​Gray ​A5
 


3. Copy and Paste the following code to your Arduino IDE and upload to Arduino Uno

//Circuit Blocks LCD Test Software v1.0 for 20x4 LCD
//revised code from http://arduino-info.wikispaces.com/LCD-Blue-I2C#v3 for LCD test

// Get the LCD I2C Library here: 
// https://bitbucket.org/fmalpartida/new-liquidcrystal/downloads
// Download 'LiquidCrystal_V1.2.1.zip'. Install downloaded library.
// Move any other LCD libraries ('C:\Documents\Arduino\libraries') to another folder or delete them.

#include <LiquidCrystal_I2C.h>
#include <Wire.h>  // Comes with Arduino IDE

LiquidCrystal_I2C lcd(0x3F, 2, 1, 0, 4, 5, 6, 7, 3, POSITIVE);  // Set the LCD I2C address

void setup()
{
  lcd.begin(20,4);         // initialize the lcd for 20 chars 4 lines, turn on backlight

// ------- Quick 3 blinks of backlight  -------------
//this is not really important as it will only toggle the backlight on and off
//you can remove or comment these next 8 lines
  for(int i = 0; i< 3; i++)
  {
    lcd.backlight();
    delay(250);
    lcd.noBacklight();
    delay(250);
  }
  lcd.backlight(); // finish with backlight on  

//-------- Write characters on the display ------------------
  lcd.setCursor(4,0);                        //Start at character 4 on line 0
  lcd.print("Hello World!");
  delay(1000);
  
  lcd.setCursor(2,1);                        //Start at character 2 on line 1
  lcd.print("20x4 LCD module");
  delay(1000); 
  
  lcd.setCursor(0,2);                        //Start at character 0 on line 2
  lcd.print("fb.com/circuitblocks");
  delay(1000);
  
  lcd.setCursor(1,3);                       //Start at character 1 on line 3
  lcd.print("circuitblocksph.com");
}

void loop()
{
  //loop
}